Installation and configuration

Installation

Important

First need to do setting up the environment. All commands are executed only from superuser.

Mode superuser:

sudo -i

Important

Installation is performed on control node.

  1. Save the list of previously installed packages before starting the installation, this will allow to painlessly restore the system in case of damage. Run the following commands to do this:

    mkdir -p /tmp/rollback/dashboard
pip3 freeze > /tmp/rollback/dashboard/pip_before.txt

    After that, the directory /tmp/rollback/dashboard will contain the file pip_before.txt with a list of installed applications.

  2. Also save migration versions:

    python3 /usr/share/openstack-dashboard/manage.py showmigrations > /tmp/rollback/dashboard/migrations.txt

    Where:

    • /tmp/rollback/dashboard/ is a file directory;
    • migrations.txt is a name of the file with migration versions.

  3. OpenStack Horizon package installation:

    apt-get install openstack-dashboard

  4. Dashboard package installation:

    • from Python package repository:

      pip3 install dashboard

  5. Save the list of installed packages after installation to be able to roll back changes:

    pip3 freeze > /tmp/rollback/dashboard/pip_after.txt

Note

To install Dashboard and Dashboard Theme on Astra Linux (Smolensk) do following:

  1. Connect the provided repository with AccentOs packages.

  2. Install the package with the command:

    sudo apt install -y aos-dashboard
sudo apt install -y aos-dashboard-theme

Installation on two or more controllers

It is need when installing Dashboard on two or more controllers:

  1. to replicate database for each of controllers;
  2. to install module with the same parameters for each of controllers.

Note

Deleting and diagnostics of the module on each controller is performed in the same way as in the case of one controller.

Configuration

It is need to configure the Dashboard module for correct operation.

  1. Perform the initial configuration of the module:

    openstack aos configure -n dashboard

  2. Check for the presence of a configuration file named local_settings or local_settings.py in the directory /etc/openstack-dashboard/ , if it is missing, copy the settings from the sample (local_settings.py.example) and add the Dashboard settings import to it:

    try:
    from dashboard.django_settings import *
except ImportError:
    pass

  1. Copy the sample configuration file, if using non-standard parameters, edit them (for details see Configuration file):

    cp /etc/aos/dashboard.conf.example /etc/aos/dashboard.conf

  2. Run the command to collect static files:

    python3 /usr/share/openstack-dashboard/manage.py collectstatic

  3. Create database using MySQL as an example, configure rights, database type and other parameters:

    # Login to the database using the root password
mysql -uroot -p
# Create dashboard database
CREATE DATABASE dashboard;
# Give permission to read, edit, perform any actions on all tables in dashboard database
GRANT ALL PRIVILEGES ON dashboard.* TO 'aos'@'localhost' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON dashboard.* TO 'aos'@'%' IDENTIFIED BY 'password';
# Exit the database

  4. Edit section [database] of the configuration file etc/aos/dashboard.conf, for example:

    [database]
url = mysql+pymysql://aos:password@tst.stand.loc:3306/dashboard?charset=utf8

  5. Migrate database:

    openstack aos db migrate -n dashboard

  6. Restart the web server and caching service:

    # Debian:
systemctl restart apache2
systemctl restart memcached

Connecting Dashboard Module Theme

Note

Theme is an additional option and is optional for the normal operation of the module.

Connecting standard Dashboard Theme:

  1. Install the theme package:

    • from Python package repository:

      pip3 install dashboard_theme

  1. Check for the presence of a configuration file named local_settings in the directory /etc/openstack-dashboard/ п, if it is missing, copy the settings from the sample (local_settings.py.example)

  2. If the Dashboard module is not installed connect the theme in the configuration file local_settings.py:

    try:
    from dashboard_theme import *
except ImportError:
    pass

  3. Run the command to collect static files:

    python3 /usr/share/openstack-dashboard/manage.py collectstatic

  4. If local_settings.py contains the flag true for the line:

    COMPRESS_OFFLINE = True

    run the command:

    python3 /usr/share/openstack-dashboard/manage.py compress

  5. Restart the web server and caching service:

    # Debian:
systemctl restart apache2
systemctl restart memcached

Connecting AccentOS® Ocean theme:

Note

Dashboard Ocean theme for Astra Linux 1.7 is supported since version 1.14.0.

In addition to the standard AccentOS® theme, you can install the AccentOS® Ocean theme if required. To do this, follow these steps:

  1. Install the AccentOS® Ocean theme package:

    pip3 install dashboard_ocean

  2. Check for the presence of a configuration file named local_settings in the directory /etc/openstack-dashboard/ п, if it is missing, copy the settings from the sample (local_settings.py.example)

  3. If the Dashboard module is not installed connect the theme in the configuration file local_settings.py:

    try:
    from dashboard_ocean import *
except ImportError:
    pass

  4. Run the command to collect static files:

    python3 /usr/share/openstack-dashboard/manage.py collectstatic

  5. If local_settings.py contains the flag true for the line:

    COMPRESS_OFFLINE = True

    run the command:

    python3 /usr/share/openstack-dashboard/manage.py compress

  6. Restart the web server and caching service:

    # Debian:
systemctl restart apache2
systemctl restart memcached

Note

If you install both themes (AccentOS® and AccentOS® Ocean) without installing the Dashboard module, then import of both themes must be added to the local_settings.py file.

Configuration file

Note

Config file allows to override sections and parameters of common file aos.conf for specific module.

Note

There are no lines with the level logging by default in the file dashboard.conf.example, it is specified if necessary. Level logging is set by default in the general configuration file. More information about the configuration files can be found in the corresponding section.

Configuration file is presented in ini format and consists of the following sections and parameters:

Section Parameter Description Default value
DEFAULT enable_cinder_backups Flag responsible for displaying the «Volume Backups» tabs and actions for creating volume backups. True
DEFAULT enable_clouds «Public clouds» tab activation. False
DEFAULT enable_counts «Counts» nav panel activation. True
DEFAULT enable_numa_topology «NUMA Topology» tab activation. False
DEFAULT enable_qos QoS Network Policies tab activation. False
DEFAULT enable_tkcontrol «TKControl» tab activation. True
DEFAULT min_reserve_vm Default value for the minimum number of reserved virtual machines when creating a TRS project. 1
DEFAULT otp_sender_method Method of sending OTP to user. telegram
DEFAULT selectable_themes List of available themes to choose from. default, accentos, accentos_ocean
DEFAULT tkcontrol_host TKControl host address.  
DEFAULT tkcontrol_password User password for authorization in TKControl. admin
DEFAULT tkcontrol_user Username for authorization in TKControl. admin
database url Database connection settings. mysql+pymysql:/ /aos:password@l ocalhost:3306/d ashboard?charse t=utf8

Important

It is need to perform the procedure described in the section «Updating config file» when changing the parameters of the configuration file to take effect.

Recovery plan

Roll back if the Dashboard plug-in installation or update fails:

  1. Compare versions of migrations in file /tmp/rollback/dashboard/migrations.txt with current. If there are any differences, migrate to the previous version for each of the applications. Migration example:

    python3 /usr/share/openstack-dashboard/manage.py showmigrations
openstack aos db migrate -n dashboard --migration "frame 0001_initial"
openstack aos db migrate -n dashboard --migration "sessions 0001_initial"

  2. Revert to the previous state of the packages:

    cd /tmp/rollback/dashboard
diff --changed-group-format='%>' --unchanged-group-format='' pip_before.txt pip_after.txt > pip_uninstall.txt
diff --changed-group-format='%<' --unchanged-group-format='' pip_before.txt pip_after.txt > pip_install.txt
pip3 uninstall -r pip_uninstall.txt
pip3 install -r pip_install.txt